10 In 1 Motlakase Voltage Tester Sensing Screwdriver

Tlhaloso e Khutšoanyane:

Sensor ea Snap-in: e khona ho bona voltage ea AC ntle le ho hokahana le lithapo tse phelang.

E na le mojule oa ho lemoha motlakase o tlosoang (50-600V AC).

Non magnetic bits lock system.

likotoana li bolokoa ka shaft le mofeng.

Ho tšoara ka boiketlo bakeng sa mosebetsi o motle.

Ka insulated shaft le sebetsana.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Likaroloana

1.5/16 "Lehare le ka sehloohong la screwdriver: lisebelisoa / ML08A1 tšepe ea hlooho e batang, e khanyang ea chrome e holim'a metsi, bophara bo ka hare ba shank / 8.03-8.40mm, bophara ba ka ntle / 10.7-11.0mm, bolelele bo pepenene / 83-90mm; insulating e ntšo e thatafalitsoe PP e phuthetsoe molamu, bophara bo tlase ba molamu o phuthetsoeng / 13.3-13.7mm, bophara bo kaholimo ba molamu o phuthetsoeng / 12.6-13.0mm; Creepage groove e eketsoa molamu o phuthetsoeng motso oa lehare le ka sehloohong ho ntlafatsa ts'ebetso ea ho kenya letsoho.

2.1 / 4 "hexagon shank: thepa / 50bv-30 tšepe, ho thatafala ka mor'a kalafo mocheso lokela ho fihla HRC40 kapa ka holimo, bokaholimo e nickel plated kapa chrome e khanyang plated, bophara ba ka ntle ea shank (hexagonal bohale ho ea moeli sebaka) / 7.85 -8.0mm, le bophara bo ka hare (hexagonal edge ho ea moeling) / 6.4-6.53mm; Bohareng ba casing ho na le liliba le libolo tsa tšepe, 'me boima ba libolo tsa tšepe bo ka holimo ho HRC50.

3.4pcs 1 / 4 "li-screwdriver tse peli tsa hlooho: Ph1 + SL3 / 16";PH2+SL1/4”;TORX10+TORX15;R1+R2;Boitsebiso / # 6150 chrome vanadium tšepe, boima ka hare ho HRC 48-55 ka mor'a phekolo ea mocheso, holim'a lehlabathe;Bophahamo bo ka ntle ba karoloana (sebaka se pakeng tsa mahlakore a fapaneng a hexagon) / 6.29-6.35mm ke magnetized;Ka mor'a hore karoloana e bokelloe ho letsoho la hexagon ebe e ea lebaleng le leholo la seha, sebaka se tlohang holimo ho sekoahelo ho ea holimo ho bar e kholo ea seha ke / 20-25mm.

4. Mebala e 'meli ea ABS + TPR insulated handle, ABS hare-hare core, TPR e ntšo e koahetsoeng rabara;Kakaretso ea bolelele ba ho sebetsana ke 115mm.Mohatla o na le slot bakeng sa ho kopanya li-sensor.Sebaka sa polokelo se ka tlase ho sekotjana se ka amohela likotoana tse peli tsa screwdriver;

The screwdriver e fetisitse teko ea 10000V high-voltage ntle le mathata leha e le afe a boleng a kang ho senyeha le ho lutla, 'me e ile ea hlahlojoa ka tieo ho latela maemo a IEC60900.

5. Matla a sututsang: matla a sututsang a thellang a inductor ≤ 0.5kg;Sensor kopano ≤ 1.8kg;Khatello ea disassembly ea inductor ke 0.75-2.2kg;Kopano e ts'oarellang hanyenyane ≤ 3.0kg;Matla a ho hula a hlooho ke 0.6-1.4kg;Hexagon shank kopano ≤ 3.0kg;Matla a hulang a hexagon shank ke 0.7-1.8kg.

6. Torque: Torque ea hexagon shank ＞ 17nm;Torque ea lehare le molamu ~ 24nm.